Slate roofing in Dallas

Natural and synthetic slate, hung and flashed the slate way

Slate Roofing in Dallas Built to Outlast the House

Slate is the longest-lived roof a Dallas home can carry, and the most demanding to install well. The slates are hung on hooks or straps, the flashing is copper, and the structure underneath is evaluated before a single slate goes on. We install, repair and replace slate roofing in Dallas — including the historic houses where slate is part of the architecture.

Open 24 hours, every dayHung one slate at a timePhotos at every stage
Call firstTell us about the roof — natural or synthetic slate, age, what you have seen — and we talk through what happens next
Safety before speedWe check the structure and the deck before any slate is ordered
Diagnose the causeWe plan the system around the stone, the structure and the copper
Approve the workYou see the written scope before anything is hung or cut

What's included

What slate roofing includes

A slate roof is a system: the stone, the structure, the copper flashing and the ventilation — each part fitted to the house, each detail finished to last as long as the slate.

01

Natural slate

Hand-cut stone in varied colour, hung on hooks or straps, with copper flashing. The longest-lived roof a Dallas home can carry, and the one that suits its historic houses.

02

Synthetic slate

Reads as slate from the street, at a lower weight and a lower cost. The right choice where the structure rules out natural stone, or the budget does.

03

Structure evaluated first

The spans and the decking are checked before any slate is ordered, and reinforced where the weight needs it. A slate roof is only as good as what it hangs on.

04

Copper flashing throughout

Valleys, chimneys and ridges are flashed in copper, because the flashing has to last as long as the stone. No other metal is used on a slate roof.

05

Permit and district rules

Dallas requires a permit before any new roof covering is applied, and a final inspection once the work is complete. Work on a historic home may also need a Certificate of Appropriateness — we check the district rules first.

Service overview

What slate roofing in Dallas actually involves

Slate roofing in Dallas is the installation, repair and replacement of natural and synthetic slate roofs, mostly on historic and estate homes in Preston Hollow, Lakewood, Kessler Park and the M-Streets. Slate is heavy, it is hung rather than nailed, and it is repaired one slate at a time — which is why the crew and the method matter more than the material.

Slate is a different trade from shingles. The slates are hung on hooks or straps, not nailed through the face, and a single slate can be replaced without disturbing the field around it — which is how a slate roof is repaired. The structure underneath has to be evaluated first, because slate is heavy, and the flashing is copper, because it has to last as long as the stone. A slate roof installed by a shingle crew will not last; a slate roof installed by a slate crew will outlast the house.

One slate at a timeA single slate can be replaced without disturbing the field, on a hook or a copper strap. That is the repair that makes a slate roof last a century: the field is never opened to fix one stone.
The structure comes firstSlate is heavy, and the structure beneath the roof has to be evaluated before any slate goes on. A slate roof on a structure that cannot carry it is a roof that will fail — which is why the structure is checked first, not last.
Copper lasts as long as the stoneThe flashing on a slate roof is copper, because it has to last as long as the stone. A slate field can outlast its flashing by decades, and when the flashing is renewed, it is renewed in copper.
Natural slate courses on a Dallas historic home
How we workWe verify the cause, compare realistic options, and confirm the work before we leave.

The service timeline

What to expect on a slate job

The sequence is slower than a shingle job, and that is the point — slate is hung one piece at a time.

01

Inspection

We walk the field, check the slates, the hooks and the copper flashing, and look at the structure and the decking underneath. You get photos and a written scope.

Stage 1
02

Scope

The written scope names the slate — natural or synthetic — the structure work, the copper flashing, and the ventilation, so the job is agreed before any stone is ordered.

Stage 2
03

Structure and deck

The spans and the decking are checked and reinforced where the slate needs it, and the underlayment is laid. A slate roof is only as good as what it hangs on.

Stage 3
04

Hanging

Slates are hung course by course on hooks or straps, with copper flashing at valleys, chimneys and ridges, and the ridge finished in slate and copper. The work is slow, and that is the point.

Stage 4
05

Cleanup and walkthrough

Offcuts collected, the ground swept with a magnet, and a walk of the finished roof with you. You receive the photos and paperwork for the job.

Stage 5

Tools & methods

Tools and methods we use on your slate roof

Slate tools are for working stone, not for forcing it — the slates are hung, not nailed through the face.

01

Slate ripper

Slides under a slate and cuts the nail, so a single damaged slate comes out without disturbing the field around it.

02

Slate hooks and copper straps

Hang replacement slates in place without new nail holes, which is how a slate repair lasts as long as the roof around it.

03

Slate hammer and cutter

Cuts and trims natural slate to fit each course, valley and ridge, with the stone's own edge showing.

04

Copper flashing tools

Forms copper flashing for valleys, chimneys and ridges, because the flashing has to last as long as the stone.

05

Fall protection harness

Keeps every installer tied off on steep slate pitches, which are slicker than shingle roofs and need the protection more.

06

Copper nails and hooks

Fastens each slate with copper nails or hooks, so the fastener outlasts the slate and never rusts through.

Use cases

When Dallas homeowners call us for slate

These examples show how slate work is planned around the stone, the structure and the flashing.

Natural slate roof on a historic Dallas home
Slate repair on a Kessler Park TudorA Tudor in Kessler Park with a natural slate roof in blue-grey tones, copper flashing at the chimney and valleys, and a ridge that has been in place for decades. The work was a repair: individual slates replaced on hooks, the copper valleys checked, and the field left untouched.

Slate replacement in Preston Hollow

A full slate replacement on a large estate home, where the structure was evaluated first and the decking reinforced where the span needed it. Natural slate in mixed tones, copper flashing throughout, and a ridge finished in slate and copper.

Synthetic slate in North Dallas

A synthetic slate roof where the weight of natural stone ruled it out. The synthetic courses read as slate from the street, the copper valleys are real, and the roof carries the look without the structure work.

Problems we solve

Problems a slate roof solves for Dallas homes

Most slate calls are one of these four. Each one starts with the same question: natural or synthetic, and what does the structure need?

ISSUE

Slates slipping or missing

Individual slates are replaced on hooks or copper straps without disturbing the field, so the repair is invisible and the roof keeps its life.

SIGN

Leaks at copper valleys

Copper valleys are checked for pinholes and wear, and renewed in copper where the stone has outlasted the metal.

SYMPTOM

Roof that outlasts its flashing

A slate field can last a century while the flashing fails. We renew the flashing in copper and leave the field in place.

ALERT

Historic home needing the right roof

On a historic home, slate is part of the architecture. We check the district rules and the Certificate of Appropriateness before any work is agreed.

Cost factors

What shapes the cost of a slate roof in Dallas

SLATE TYPE, STRUCTURE, SIZE AND FLASHING SET THE SCOPE

Phase 01

Natural or synthetic

Natural slate is the premium material, quarried and hand-cut. Synthetic slate reads as slate at a lower weight and a lower cost, and suits roofs where natural stone is ruled out.

Phase 02

Structure underneath

Slate is heavy. If the spans or the decking need reinforcing, that work is part of the scope — and it is listed in it before any slate is ordered.

Phase 03

Copper flashing

Valleys, chimneys and ridges are flashed in copper, because the flashing has to last as long as the stone. Copper is part of the slate system, not an add-on.

Customer reviews

What Dallas Clients Say About Our Slate Work

5.0★★★★★41 Google reviews
★★★★★
“They also cleaned up at the end of each day, which is hard to find with many contractors. I was especially impressed with how neat everything was left and how smoothly the job was completed.”
JH
Jesus HoodGoogle review · 3 weeks ago

Questions before we arrive

Slate roofing questions Dallas homeowners ask

Slate Roofing
Call (469) 960-7533
Does my roof need reinforcing for slate?

Yes. Natural slate is heavy, and the structure beneath the roof has to be evaluated before any slate goes on. If the spans or the decking need reinforcing, that work is part of the scope. Synthetic slate is lighter and suits roofs where natural stone is ruled out by weight.

Can a single slate be replaced?

Individual slates can be replaced without disturbing the field, using a slate hook or a copper strap. The damaged slate comes out, the replacement goes in on its hook, and the courses around it are untouched. It is the repair that makes a slate roof last a century.

Natural or synthetic slate?

Natural slate is the real stone: hand-cut courses in varied colour that last longer than the house. Synthetic slate reads as slate from the street, at a lower weight and a lower cost. The choice depends on the structure, the budget, and the look the home needs.

Does a slate roof need a permit in Dallas?

Yes. Dallas requires a permit before any new roof covering is applied, under City Code Chapter 52, section 301.4.6.3. The application lists where debris will go, and a final inspection follows once the work is complete and proof of disposal at a city landfill or transfer station is submitted. Work on a historic home may also need a Certificate of Appropriateness — we check the district rules first.

Ready when you are

Get your slate roofing Dallas TX quote

An inspection, photos, and an itemised written quote for the slate work as scoped. Call (469) 960-7533 and tell us about your home.

Slate Roofing

Talk with the local team

Request Slate Roofing

Call us at (469) 960-7533 or send a message and we will get back to you. We are open 24 hours, every day. Tell us about the roof and the slate on it, and we will give you a straight answer on what it needs.

3919 Cedar Springs Rd, Dallas, TX 75219Main office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now